BRWNK - A-200/A-201 NICKEL ALLOY
- MSDS: BRWNK
- Manufacturer: J AND J INC
- Product Name: A-200/A-201 NICKEL ALLOY
- National Stock Number: 3439-00F029538
Product Identification
Product ID:A-200/A-201 NICKEL ALLOY
MSDS Date:12/18/1985
FSC:3439
NIIN:00F029538
MSDS Number: BRWNK
Responsible Party
HAMPTON, GA 30227
US
Emergency Phone: 800-842-1984
Info Phone: 800-842-1984
Cage: 2L592
Contractor
Telephone: 800-842-1984
Cage: 2L592
Ingredients
CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: <0.5%
OSHA PEL 1 MG/CUM (CEILING)
ACGIH TLV: 0.5 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: >99%
OSHA PEL 1 MG/CUM
ACGIH TLV: 0.05 MG/CUM IC
MANGANESE, MN COMPOUNDS
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: <1.2%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
COBALT
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: <0.5%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CHROMIUM- PULMONARY
DISEASE/LUNG FUNCTION IMPAIRMENT; NICKEL- RESPIRATORY
IRRITATION/PNEUMONITIS; MANGANESE- PNEUMONITIS/CNS
EFFECT/PARKINSON-LIKE SYNDROME; COBALT- INTERSTITIAL PNEUMONITI
S/SENSITIZATION OF RESPIRATORY SYSTEM: SKIN: DERMATITIS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:INHALATION: IRRITABILITY, DIFFICULTY IN
WALKING, SPEECH DISORDERS, COMPULSIVE BEHAVIOR, MASK-LIKE FACE,
COUGH, DYSPNEA ON EXERTION, DECREASED PULMONARY FUNCTION, WHEEZING,
SHORTNESS OF BREATH. EYES: I RRITATION. INGESTION: IRRITATION OF
MOUTH & THROAT.
First Aid
First Aid:INHALATION: SEEK MEDICAL ATTENTION IF NECESSARY. SKIN: WASH
W/SOAP OR MILD DETERGENT & WATER FOR 5 MINS. EYES: IMMEDIATELY WASH
W/LARGE AMOUNTS OF WATER FOR 15 MINS, OCCASIONALLY LIFTING
LOWER/UPPER L IDS. INGESTION: SEEK MEDICAL ATTENTION IF NECESSARY
IN ALL CASES.
Fire Fighting
Unusual Fire/Explosion Hazard:NO FIRE OR EXPLOSION HAZARDS.
Handling
Handling and Storage Precautions:DURING WELDING, AIRBORNE CONTAMINANTS
& NOXIOUS GASES MAY ORIGINATE FROM THE WELDING PROCESS.
Exposure Controls
Respiratory Protection:PROPERLY FITTED, NIOSH-APPROVED, DUST-FUME
RESPIRATOR SHOULD BE WORN DURING WELDING/BURNING WHENEVER WELDING
FUMES EXCEED THE TLV/OTHER RECOMMENDED LIMITS IN ACCORDANCE W/OSHA.
Ventilation:WHERE EXPOSURES ARE ABOVE TLVS.
Supplemental Safety and Health
STEEL PRODUCTS AS SHIPPED ARE INERT. BUT, DUE TO DOWN STREAM PROCESSING
SUCH AS WELDING, BURNING, GRINDING, HEATING, & MACHINING, METAL
FUMES & GASES MAY BE GENERATED, WHICH MAY BE DANGEROUS TO ONES H
EALTH.
Chemical Properties
Spec Gravity: 8-8.9
Appearance and Odor:ODORLESS SOLID W/METALLIC LUSTER. AVAILABLE
PLATES/DISCS/HEADS/SLABS.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:ARC & SPARKS WHEN WELDING W/THIS PRODUCT
COULD BE A SOURCE OF IGNITION FOR COMBUSTIBLE & FLAMMABLE
MATERIALS.
Hazardous Decomposition Products:METAL FUMES/NOXIOUS GASES (CO),
HEXAVALENT CHROMIUM WHICH IS A HAZARDOUS WASTE & SUSPECTED
CARCINOGEN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.